Weatherproof Bluetooth® Controller / Receiver
Designed for marine and powersports applications, the MBT-CRXv2 Bluetooth® Controller/Receiver delivers your favorite music from a Bluetooth® equipped device directly to your audio system.
With an IP67 water resistance rating, the MBT-CRXv2 is ideal for small watercraft, motorcycles, ATV’s or other utility vehicles. Add Bluetooth® connectivity to any source unit with line-level/auxiliary inputs or connect directly to an amplifier and use it as a stand-alone source unit/receiver. Large LED backlit push-button controls are easy-to-see and easy-to-use, day or night. A small footprint and clever, one-hole design makes installation a breeze. An adaptor plate is also included for easy front mounting or where rear access is limited or not possible.
Equipped with Bluetooth® v4.0 and the Qualcomm® aptX™ audio codec, the MBT-CRXv2 sends top-quality audio and performance from compatible devices to deliver dynamic, CD-like sound without any cables. With a wireless connection range of up to 35 ft., you can conveniently control the connected audio without returning to your Bluetooth® device. This means your device can stay safely tucked-away from the elements.
When you’re ready to set sail or tackle your next adventure, great sound is waiting for you with the MBT-CRXv2 Bluetooth® Audio Controller/Receiver.
JL Receiver/Controller: MBT-CRXv2
Pairing Bluetooth
Pairing Your Device (required for operation):
1. Ensure your streaming device has Bluetooth® enabled and that the MBT-CRXv2 is on (backlit in blue). The JL Audio logo on the MBT-CRXv2 will blink to indicate it is in pairing mode.
2. Within your streaming device’s Bluetooth® setup menu, select “MBT-CRXv2” from the list of pairable devices.
3. When successfully connected, the JL Audio logo on the MBT-CRXv2 will stop blinking and remain lit. A single beep will be heard through the connected audio system.
Pairing Considerations:
Multiple devices can be paired to the MBT-CRXv2, but only one streaming device can connect at one time.
The MBT-CRXv2 will remember the last device that was connected to it and reconnect with it automatically. If that streaming device is not active, then other paired streaming devices can connect manually, or new streaming devices can be paired.
When a connected streaming device is out of range for more than one minute, the MBT-CRXv2 will automatically disconnect this streaming device and return to pairing mode (JL Audio logo will blink). When that same device comes back into range, it should be reconnected to the MBT-CRXv2 manually.
Controlling Audio Playback:
Once connected, use the controls on the MBT-CRXv2 to adjust volume up/down, track selection and play/pause.
